Table of Contents
Advertisement
Copyright © 2017, Juniper Networks, Inc.
Router winch mount with winch strap plate
To install the router transport kit:
Remove the router transport kit from the shipping crate (see
1.
Transport Kit" on page
NOTE:
The router transport kit weighs approximately 138.5 lb (62.82 kg).
Remove the winch strap plate that is secured to the winch mount by using a
2.
9/16-in. (14 mm) socket wrench, and set the plate aside.
Using a number 3 Phillips screwdriver, loosen the captive screws that secure the winch
3.
mount to the router transport kit, and set the mount aside.
Using a number 3 Phillips screwdriver, loosen the captive screws that secure the router
4.
transport mounting plate and wheel assembly (left and right) to the router transport
platform, and set them aside (see
Figure 19: Preparing the Router Transport Kit for Installation
Remove the four shipping brackets that secure the router to the shipping crate platform
5.
by using a 9/16-in. (14 mm) socket wrench and a number 2 Phillips screwdriver, and
set the brackets aside.
Align the left router transport mounting plate and wheel assembly (indicated by left
6.
arrow shown on the assembly) with the holes on the left side of the chassis (see
Figure 20 on page
28).
Install the Router Transport Kit onto the Router
24).
Figure 19 on page
"Unpack the Router
27).
27
Advertisement
Table of Contents
