Table of Contents
Advertisement
Remove Components
Copyright © 2017, Juniper Networks, Inc.
Remove the large mounting tray.
8.
Remove the accessory box.
9.
Verify the parts received against the lists.
10.
Remove the vapor corrosion inhibitor (VCI) packs attached to the pallet, being careful
11.
not to break the VCI packs open.
To remove the brackets holding the chassis to the pallet, use a 1/2-in. socket wrench;
12.
and a number 2 Phillips screwdriver to remove the bolts and screws from the brackets.
Set the shipping brackets aside for later use to secure the router to the pallet jack
13.
attachment.
NOTE:
If you ordered a router transport kit, see
Transport Kit" on page 24
the router transport kit.
Save the shipping crate cover and packing materials in case you need to move or ship
14.
the router at a later time.
The router might have field replacement units (FRUs) installed. Remove these FRUs
from the MX2008 router before installing the router into a rack or cabinet (see
Figure 8 on page
15,
Figure 9 on page
Figure 8: Components to Remove from the Front of the MX2008 Router
"Unpack the Router
for instructions on how to unpack and install
16, and
Figure 10 on page
18).
Remove Components
15
Advertisement
Table of Contents
