Step 3: Install The Router; Unpack The Router - Juniper MX2008 Quick Start Manual

3d universal edge router

Hide thumbs Also See for MX2008:

Table of Contents

Step 3: Install the Router

Unpack the Router on page 13

Remove Components on page 15

Install the router using one of the following procedures:

Install the Router by Using a Pallet Jack with Attachment on page 20

Install the Router Using a Router Transport Kit on page 24

Unpack the Router on page 13

Remove Components on page 15

Install the Router by Using a Pallet Jack with Attachment on page 20

Install the Router Using a Router Transport Kit on page 24

The router is shipped in a wooden crate. A wooden pallet forms the base of the crate.

The router chassis is bolted to this pallet. A large rack mount tray, a pallet jack attachment,

EMI covers, and a cardboard accessory box are also included in the shipping crate.

Before removing the router from the shipping crate, you must remove all components

(see

"Remove Components" on page

Because of the router's size and weight—up to 742.2 lb (336.66 kg) for AC chassis and

664.8 lb (301.55 kg) for DC chassis depending on configuration—we strongly recommend

that you install the router by using a router transport kit or a pallet jack with pallet jack

attachment.

15).

Step 3: Install the Router

Table of Contents