Table of Contents
Advertisement
MX2008 3D Universal Edge Router Quick Start
30
CAUTION:
Do not lift the router by using the handles on the shipping
covers. Use these handles only to help position the router.
Position the router transport platform directly under the router, aligning the router
6.
transport platform with the bottom of the chassis by adjusting the four leveling mounts.
NOTE:
The router transport platform height can be adjusted from
0.25 in. (0.6 cm) to a maximum of 4 in. (10.16 cm).
Secure the router transport platform to the router transport mounting plates by using
7.
the four latch locks (see
Figure 22: Securing the Router Transport Platform
Use the Router Transport Kit to Install the Router in a Four-Post Rack
Because of the router's size and weight—up to 742.2 lb (336.66 kg) for AC chassis and
664.8 lb (301.55 kg) for DC chassis depending on the configuration—we recommend
that you use a router transport kit to install the router.
NOTE:
Four people are needed to install the router into a rack.
Figure 22 on page
30).
Copyright © 2017, Juniper Networks, Inc.
Advertisement
Table of Contents
