Table of Contents
Advertisement
Copyright © 2017, Juniper Networks, Inc.
Figure 21: Securing the Crate Door to the Shipping Crate Platform
NOTE:
An empty MX2008 weighs approximately 261 lb (118.39 kg).
Using a two-person team on either side of the chassis, turn the handles on the router
3.
transport kit 4–5 times until the chassis is raised approximately 1 in. (2.54 cm), making
sure that the chassis is level.
NOTE:
The router transport kit is equipped with four T-shaped levels on
top of each of the four router transport mounting brackets. Make sure the
bubbles within the T-shaped levels are between the lines, indicating the
chassis is level.
CAUTION:
Do not raise the chassis above 1 in. (2.54 cm). This will ensure
that the router will not tilt when transporting, which can result in injury or
damage to the router.
Turn the four wheels on the router transport kit toward the rear of the chassis.
4.
Grasping the handles on the shipping covers, carefully guide the chassis down the
5.
crate to the rack location.
WARNING:
Do not push or pull the router fast while transporting. Using
excessive speed can cause the wheels to turn abruptly and tilt the router
over.
Secure the Router to the Transport Platform
29
Advertisement
Table of Contents
