Juniper MX2008 Quick Start Manual page 36

MX2008 3D Universal Edge Router Quick Start
36
Figure 28: Pulling the MX2008 into the Rack
NOTE:
A four-person team is needed to carefully guide the router into the rack
while operating the winch.
If the router is not pulled all the way into the rack by the winch
mechanism, grasp the handles on the shipping covers and carefully slide
the router onto the mounting shelf until the front-mounting flanges
contact the rack rails. You must remove the winch bracket to perform
this procedure.
There must be a minimum of 24-U of usable rack space when installing
the MX2008 into a 24-U rack.
Remove the router transport platform, and set the platform aside.
11.
Remove the winch mount and winch strap plate, and set them aside.
12.
Copyright © 2017, Juniper Networks, Inc.