Direct Station Selection (Dss) - AT&T SYSTEM 25 User Manual

Direct Station Selection (DSS)

There are two kinds of DSS buttons: Fixed and Flexible. Fixed
DSS buttons, (DSS) contain PDCS or access codes programmed
by the System Administrator. Flexible DSS buttons, (FLEX DSS)
allow you to program frequently called PDCs and other System
25 access codes. If the light is on next to these types of buttons,
you can activate a busy-to-idle reminder. This reminder lets you
know when you can make your call.
For instructions on how to store (FLEX DSS) numbers, see the
entry for "Programming Numbers" on page 76.
Placing a Call Using Direct Station Selection
Activating a Busy-to-Idle Reminder
60
1 Lift the handset and listen for dial tone.
2 Press (DSS) or (FLEX DSS) .
1 Do not lift the handset.
2 Press (DSS) or (FLEX DSS) .
Your voice terminal will ring once
NOTE:
when the other person hangs up, and your
call will be placed automatically when you
lift the handset.
(Continued)