Leave Word Calling - AT&T SYSTEM 25 User Manual

Leave Word Calling

You can use the Leave Word Calling feature only if a VOICE
POWER Voice Message System is connected to your System 25.
If any one of the following situations exists, you may choose to
use this feature to leave a message that you have called.
The person you are calling is busy.
Your call is not answered.
You are waiting in a callback queue for the station. (If you
use the Leave Word Calling feature when you are waiting in
a callback queue, your callback request will be canceled.)
You have been connected to the station's coverage receiver.
You are not active on a call.
For directions on getting messages left at your voice terminal,
see your System Administrator.
Leaving a Message While You Are Active on a Call
1 Press (LEAVE WORD CALLING) .
2 Listen for confirmation tone and then
hang up.
If you hear fast busy tone instead of
NOTE:
confirmation tone, the other voice terminal
does not have a message waiting light.
(Continued)
71