Model: Uty-Rhku - Fujitsu Airstage J-II Series Design & Technical Manual

2-8-2. MODEL: UTY-RHKU

This controller cannot select mode. An additional controller
is required for the user to select heating or cooling mode.
F
„ FUNCTIONS
„
4
Display panel
6
9
*1 : "AUTO " is not available for a heat pump model unless it is set up master indoor unit.
*2 : "FAN " is not available for a heat pump model
*3 : "HEAT " is not available for a cooling only model
*4 : during Error code history display mode.
*5 : during address display mode.
*6 : during self Diagnosis mode.
● Easy operation.
● Built-in Backgroud Light function.
● Easy installation with a slim shape with no bulge in the back.
● Error history. (Last 16 error codes can be accessed.)
● Up to 16 indoor units can be simultaneously controlled.
● Can be installed onto SW-BOX. (applies to European and other
country's standard)
● Concentrates on the basic operations such as Start/Stop, Fan
Control, and Temperature Setting.
2
3
1
5
7 12 8
10
11
1 START/STOP button
Pressed to start and stop operation.
2 Display with backlight
Lights during operation.
3 Operation lamp
Lights during operation.
4 Fan control button
Selects the fan speed
5 Set temperature button
Selects the setting temperature.
6 Standby display
Indicates during the oil recovery and defrosting operation.
7 Power source display
Indicates the main power ON.
8 Central control display
Indicates when function is locked from Display with backlight Touch
Panel Controller or System Controller.
9 Fan speed display
(AUTO
10 Set temperature
Indicates Error history number. *1
Indicates Indoor unit address. *2
11 Operating mode display
12 (Upper) Indicates the error code *1, *3 / the refrigerant
system address. *2
(Lower) Indicates the remote controller address. *1, *2, *3
- (05 - 83) -
, HIGH , MED , LOW
( A U T O * 1 , C O O L , D R Y
FAN * 2, HEAT * 3).
).
,