Dealer Info; General Information; Equipment Found Screen; Non-Communicating Equipment - Lennox iComfort E30 Installation And Setup Manual

Dealer Info

IMPORTANT
The thermostat is only accessible via the Dealer Dashboard after the
dealership's main phone number or company name is added during
thermostat commissioning. See "LennoxPros Dealer Dashboard" on page
41 for further details.
This screen in the commissioning sequence is the dealer information screen
where the dealer ID and/or phone number can be added. Once the system
is connected to the Internet, the remaining information will be populated
automatically by the Lennox server based on the dealer name or phone
number entered. All information can be entered manually if desired however.
Information that can be manually entered is name, email website, dealer
address which includes address 1, address 2, city, state and zip/postal code.
Once completed touch continue.
Dealer Info Notification Pop-Up Screen
If either the Dealer ID or phone number is NOT provided, a notification screen
will appear. The notification screen will provide information on the limitation
imposed on the system if this information is not provided. Touch no to return
to the previous screen to complete the information requested or touch yes to
continue.

General Information

On this screen general information needs to be verified or changed. Touch
any item to change its contents. A pop-up screen will appear that will allow the
information to be added or changed.
Information required:
1. Select desired language (ENGLISH, FRANÇAIS or ESPAÑOL).
2. Select country / region.
3. Select time and date which includes time, date, time zone and daylight
savings time (ON/OFF).
4. Temperature unit (Fahrenheit or Celsius).
5. Once completed touch continue.

Equipment Found Screen

This screen will display the smart hub equipment settings. Here is where
24VAC equipment will need to be added (air conditioner, heat pump,
humidifiers, dehumidifiers and ventilation equipment), by selecting the add

non-communicating equipment.

Depending on whether the smart hub is configured for air handler or furnace
operations, the name of each option will appear as either EIM-Furnace or EIM-
Air Handler.
Non-Communicating Equipment
When selecting the non-communicating (24VAC) equipment icon a screen will
appear listing equipment that can be added. When selecting an applicable
component, a green check will appear next to the item.
NOTE: A temporary dialog box will appear indicating: Updating - Wait while
we check for dependencies.
NOTE: This is where an outdoor unit type only is selected. Selections are one
or two-stage heat pumps or air conditioners. Outdoor unit capacity will
also have to be set. Other equipment that can be added are humidifiers
and dehumidifiers. Other non-communicating equipment that can be
added are:
Humidifiers
»
Dehumidifiers
»
Humiditrol
»
Auxiliary Dehumidifier
»
Fresh Air Damper
»
1 or 2 Speed ERV (energy recovery ventilation)
»
2 or 2 Speed HRV (heat recovery ventilation)
»
NOTE: Once completed touch done which will display the equipment found
screen. There the additional non-communicating equipment will now
be displayed along with the iComfort equipment.
Once completed touch continue.

Reminders

This screen allows you to set reminders as either disabled or 3, 6, 12 or 24
months and also custom by specific date. The other options on this screen is to
trigger the reminder event either by calendar or actual system run-time.
Reminders may be set for Replace filter 1, Replace filter 2, Replace UV bulb,
Replace humidifier pad, Ventilation maintenance and Ventilation filter.
Once a reminder is set for a specific item, touch done to return to the previous
screen. An "expires on date" will appear next to the item just set.
16