Home Info; Account - Lennox iComfort S30 User Manual

2. Select the access point that has already been established and connected.
When selecting the info icon, a screen will appear which will display an
option to forget the network and IP address assigned to the iComfort
Smart Thermostat by your router, sub-net mask, router, DNS and RSSI.
If the RSSI signal strength is anywhere between -9 to -69, then the signal
strength is sufficient. If outside this range, then either relocate the router
closer to the thermostat, add a repeater, or move the Smart Hub. Adjusting
antennas on router and/or Smart Hub may resolve the issue.

Home Network . . . . . . . . . . . . . . . . . . . . . . . .
forget this network
IP address . . . . . . . . . . . . . . .
subnet mask . . . . . . . . . . . .
router
DNS
RSSI . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 7. Verifying Signal Strength

HOME INFO

Selecting this option will allow the home information to be verified and corrected
if necessary. If the home information is missing, then enter the information now.
This information is required to register the system when creating an account.
The information is also used to determine the local weather if the outdoor
temperature display is set to AccuWeather.
Remove Home
There is also a selection option called remove home. Using this feature will
remove the system information from the consumer portal account. This will only
remove the system that is currently being accessed.
192.168.1.4
255.255.255.0
-40

ACCOUNT

®
S30
The account screen will allow the user to setup an account so they may access
their system remotely from the consumer portal. Reasons to create an account:
S
To enable remote access to the system using a mobile device with the
iComfort Thermostat App installed. This will allow remote adjustment for
temperature settings and other features.
S
To enable the Smart Away feature discussed later in this instruction.
S
To directly communicate to the Dealer any issues the system may be
incurring.
i
This menu allows three options:
If an S30 account has already been created, then use the sign in option to
access your account. Enter your email address and password to connect your
system to your online account.
1. Use this option to create an account. Enter your email address and desired
password. Select create new account.
2. The new account screen will appear. Enter your first name, last name and
phone number (optional).
3. Enter an email address and repeat to verify.
4. Create a password under the set password location. Retype the password
to verify.
5. Check the box that will allow your dealer to receive service alerts and
possibly fix your issue remotely (recommended).
6. Check that you agree to the Lennox EULA. Press on LENNOX EULA to
read the end-user license agreement.
If the setup and connection to the Lennox server is successful, a green check
mark will appear above the server icon under the Wi-Fi menu option.
9
Using Existing Account
Creating a New Account