Performance Reports; Replacement Parts; Mobile Applications; Icomfort Thermostat App (Homeowner) - Lennox iComfort E30 Installation And Setup Manual

• Microwave ovens
• Wireless cameras
• Portable phones and bases
• Baby monitors
• Wireless speakers
• Bluetooth devices
• Garage door openers
• Neighbor's wireless devices
To eliminate a possible source of interference, temporally disable any devices
and see if Wi-Fi performance has improved.
Received Signal Strength Indication (RSSI)
The ideal signal strength range for the thermostat is -1 to -69 RSSI. The signal
strength can be viewed from the thermostat interface.
1. Press NETWORK SETTINGS; this screen shows a graphical view of
buttons representing OPEN and SECURE wireless networks, along with
button for adding a network.
2. Select the access point that has already been established and connected.
When selecting the info icon, a screen will appear which will display an
option to forget the network and IP address assigned to the thermostat
by your router, sub-net mask, router, DNS and RSSI. If the RSSI signal
strength is anywhere between -9 to -69, then the signal strength is
sufficient. If outside this range, then either relocate the router closer to the
thermostat, add a repeater, or move the smart hub. Adjusting antenna on
router and/or smart hub may resolve the issue.
Home Network . . . . . . . . . . . . . . . . . . . . . . . .
forget this network
IP address . . . . . . . . . . . . . . .
subnet mask . . . . . . . . . . . .
router
DNS
R S I S . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 23. Verifying Signal Strength
i
192.168.1.4
255.255.255.0
4 - 0

Performance Reports

Performance reports are only available through either the consumer or dealer
web portals.
• Homeowner access is available at www.myiComfort.com.
• Dealer access is available through the Dealer Dashboard at www.
LennoxPros.com.
More information concerning Performance Reports is available in the user
guide.

Replacement Parts

The following thermostat component parts can be ordered:
Table 14. Replacement Parts
Catalog # Component
17H17 HD display
15S64 Smart hub

Mobile Applications

iComfort Thermostat App (Homeowner)

The free iComfort Thermostat app is available for use on iPhone
®
Android™ devices.
Control cooling/heating temperatures, fan operation, set programs and set
Away mode for multiple locations.

iComfort Mobile Setup App (Installer)

Allows the installer to commission the system and remotely turn the system on
and off during setup on any iPhone
Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc. registered
in the US and other countries.
Android is a trademark of Google Inc. Use of this trademark is subject to
Google permission.
32
Remarks
Thermostat interface
Control base
, iPad and Android™ device.
® ®
, iPad and
® ®