Cleaning The Paper Exit Rollers - Xerox 6100 User Manual

Cleaning the Printer
3 Open the laser lens cover.
Release the two tabs on the front edge of the lens cover and rotate the hinged
lens cover toward the rear of the printer. This will allow enough access room to
clean the lens without the need of parts removal.
4 Using a dry cotton cloth, wipe the lens.
5 Reinstall the laser lens cover.
The two tabs should snap back into place.
6 Reinstall the four toner cartridges.
7 Close the printer's front cover.

Cleaning the Paper Exit Rollers

» Note: A dry cotton cloth is required for this procedure.
1 Turn off and unplug the printer.
3-36
Tabs
magicolor 6100 DeskLaser User's Guide