Xerox 6100 User Manual page 104

Updating System
Software
After downloading, use this procedure to update the system software:
1 Turn on the printer.
2 Using the Windows Explorer, open the directory where you downloaded the
system code file.
3 Double-click the downloaded file (mc6100dl.exe).
The mc6100dl.exe file will execute its commands within a MS-DOS window and
produce a file named wps.sum.
4 When you see "Finished" in the MS-DOS window title bar, close the MS-DOS
window.
5 From the Start menu choose Run...
6 With the printer on line and Idle, in the Run dialog box type
x \copy /b wps.sum lptl
where x is the directory path where the wps.sum file is located. For example, if the
file was saved in C:\Temp directory, you would type
c:\temp\copy /b wps.sum lptl
The downloading process takes less than a minute. During the downloading pro-
cess, the Disk light blinks, and the messages New kernel..., Erasing
flash, and Writing flash appear in the printer's message window.
After the updated system software has been written to flash ROM, the printer
reboots (Booting...) with the new system image, and returns to Idle.
What's Next?
See chapter 5, "Options," for information on the installation and use of optional
accessories available for your printer.
4-8 magicolor 6100 DeskLaser User's Guide