Xerox 6100 User Manual page 162

Repacking the Printer
1 With the printer's top cover
open, at the top of the fuser,
rotate the two lock levers to
release the oil bottle.
2 Remove the oil bottle.
Caution: Hold a sheet of paper under the
oil bottle as you remove it, so no oil drips
into the printer.
3 Turn the knob on the opening on the bottom clockwise
to close it. Place the oil bottle (knob up) in an oil-proof
container such as a plastic bag, until you're ready to
reinstall it.
4 Use the fuser oil remover syringe that came with your
printer or an eye-dropper to remove any excess oil
from the printer.
» Note: Dispose of the oil in accordance with local safety laws and regulations.
7-6 magicolor 6100 DeskLaser User's Guide
Knob