Xerox 6100 User Manual page 138

Status and Service
Messages
This status message...
PUT SIZE PAPER IN
INPUTBIN BIN
REAR DOOR OPEN
REPLACE BELT
REPLACE FUSER
REPLACE FUSER CLEANER
TOP DOOR OPEN
WARMING UP
x TONER EMPTY
x TONER LOW
x TONER MISINSTALLED
6-18
means...
The Engine/Chain Inputbins is
set to Off and the displayed
cassette is empty. Refill it with
the specified size media. SIZE
is the media size detected by the
engine, and INPUTBIN is the
empty cassette.
The rear cover over the transfer
unit is not closed.
The OPC belt cartridge need
replacing.
The fuser needs replacing.
The fuser cleaning roller needs
replacing.
The top cover of the printer is
not fully closed.
The printer is warming up.
The x (color) toner cartridge is
empty.
The x (color) toner is low. There
is enough toner left to print
approximately 100 pages before
the printer stops.
The x (color) toner cartridge is
not installed properly.
magicolor 6100 DeskLaser User's Guide
Do this...
Refill the cassette with
the specified size media.
Close the rear cover.
Install a new belt
cartridge.
Have printer serviced.
Contact your local
vendor or refer to
www.minolta-qms.com
for a list of authorized
service providers.
Replace fuser cleaning
roller.
Ensure the top cover is
fully closed.
Wait. No other action
needed.
Replace the toner
cartridge.
Redistribute the toner in
the cartridge, or replace
the cartridge.
Remove the toner
cartridge and reinstall.