Xerox 6100 User Manual page 115

3 Remove the upper paper exit cover
from the top-rear of the printer.
4 Facing the back of the printer,
using a small coin or flat-bladed
screwdriver, remove the two plugs
from the upper-rear of the printer
by gently prying outward from the
plug slots.
5 Remove the two access plates
located on the rear, inside panels
of the LFU by sliding the plates
toward you.
6 Open the duplex unit top cover.
7 Attach the duplex unit by aligning
the pins with the slots located at
the lower rear of the LFU.
8 Push the top of the duplex unit
toward the printer to snap it into
place against the rear printer
casing.
Options
Duplex Unit
Plugs
Upper paper exit cover
Duplex
Access plates
Top cover
LFU
5-11