Xerox 6100 User Manual page 38

32-bit SuperDriver Setup
1st Page
Purpose
Choices
Default
Notes
Paper Graphic
The paper graphic image will change according to Paper Size, Orientation and
Duplex/Booklet selections, and will display the selected N-up setting.
Duplex/Booklet
Purpose
Choices
Default
Notes
2-12
This list allows you to identify the paper source for the first page of the
document.
Upper Tray
Optional (1 or 2)—available only on printers with one or two lower feeder
units installed.
Upper Tray
This list is disabled (grayed-out) if Different Paper for 1st Page is disabled, or
if there are no lower feeder units installed.
Allows you to specify whether and how your print job will be duplexed.
None
Long Edge—Prints flipped horizontally on the long edge as in a loose-leaf
notebook.
Short Edge—Prints flipped vertically on the short edge as on a clipboard.
Booklet Left Binding—Orients faces (2-up) with binding (fold) on left.
this option for booklets designed to be read right to left.
Booklet Right Binding—Orients faces (2-up) with binding (fold) on right.
this option for booklets designed to be read left to right.
None
Duplex/Booklet options are supported only on printers with a duplex unit
installed and the duplexer option selected on the Device Options tab.
Duplex/Booklet options are only available when Plain Paper is the Media
Type.
Printing with booklet binding produces four faces of print on each duplexed
sheet of media (2-up on each side of the media). The faces are arranged so
that when the media is folded, the page ordering is booklet style.
To use Booklet Left Binding or Booklet Right Binding, the N-up option (on the
Page Layout tab) must be Off.
magicolor 6100 DeskLaser User's Guide
Use
Use