Remove The Duplex Unit - Xerox 6100 User Manual

Remove the Duplex Unit

» Note: If you don't have a duplex unit installed, skip to the next section.
1 Close the printer's top and front covers.
2 Remove the left plastic side cover
from the lower feeder unit.
» Note: If you have two lower feeder
units installed, remove the left plastic
side cover from the top lower feeder
unit only.
3 Locate the cable at the left rear of the
optional feeder that connects the
duplex unit to the printer, and then
unplug it.
Repacking the Printer
Repacking the Printer
7-9