Using Transparencies - Xerox 6100 User Manual

Using Media Other Than
Paper
Type
Weight
Print Mode
Loading and Printing Transfer Media
1 In the printer driver (Paper tab, Media Type option), select Thick Stock.
2 Remove the upper media cassette from the printer (and remove any media
in the cassette).
3 Load the new media.
4 Reinsert the upper media cassette in the printer.

Using Transparencies

Formatting Format the information to be printed on the transparencies within your
Input
Type
Weight
Print Mode Automatic
3-12
For information about transfer media recommended for your printer, refer
to the magicolor 6100 Answer Base at www.minolta-qms.com/support/
(click on Answer Base or the sun icon).
Do not exceed the limits for thick stock, up to 43 lb (163 g/m²).
Thick Stock
application. Try printing your data on a plain sheet of paper first to check
placement.
Cassette
Standard upper media cassette only
Capacity
Up to 50 sheets, depending on the thickness of the transparencies
» Note: If you have problems feeding 50 sheets, try loading only
5–10 sheets at a time. Loading a large number of
transparencies at a time may cause static buildup, thus causing
feeding problems.
Use any transparencies (also known as OHP film) that meet normal
photocopier standards and that can withstand the fusing temperature (392°
F/200° C). We recommend
— Xerox 3R5765
— 3M CG3710
24–41.75 lb (90–157 g/m²)
magicolor 6100 DeskLaser User's Guide