Imageable Areas; Working Within The Imageable Area - Xerox 6100 User Manual

Imageable Areas

Imageable Areas

Working Within the Imageable Area

The imageable area for media sizes except oversize and envelopes is the page size
minus 0.197" (5 mm) from the top, left, and right edges. See the diagram on page
3-15 for standard plain paper. See the diagram on page 3-16 for glossy stock, label,
thick stock, transfer media, and transparency printable areas.
For printable areas on envelopes, see "Envelopes" on page 3-17.
» Note: The nonguaranteed print areas are areas on which you can print, but image
quality in these areas may be less than perfect.
Duplexing and Imageable Area
The guaranteed imageable area is reduced by an additional 0.08" (2 mm) on the lead-
ing edge of the front side of a duplexed page.
» Note: Since some media sizes can be fed into the printer either short- or long-edge
first, the "leading edge" isn't necessarily the top of the page. Check the orientation of
the media in the media cassette to determine which side is the "leading edge."
3-14
Leading edge
magicolor 6100 DeskLaser User's Guide