Xerox 6100 User Manual page 49

Resolution
Purpose Selects print resolution to use.
Choices 600 x 600 dots per inch
1200 x 600 dots per inch
Default
600 x 600 dots per inch
Fine Mode
Purpose
Used to enable or disable fine mode.
Choices Enabled (selected)—Turns fine mode on.
Disabled—Turns fine mode off.
Default Disabled
Notes Setting the print quality to Fine will reduce the printing speed by as much as
50 percent. The media feed rate is reduced to allow media to pass through the
image transfer process before the next sheet is fed into the media path. This
setting reduces printer chassis vibration that can occur during the imaging
process to its minimum level.
Detail Button
The Detail Button opens the Graphics window, where you can make adjustments to
contrast, brightness, saturation, and sharpness.
Graphics
window image
Printer Driver Configuration
32-bit SuperDriver Setup
2-23