Remove The Lower Feeder Unit(S) - Xerox 6100 User Manual

Remove the Lower Feeder Unit(s)

» Note: If you don't have a lower feeder unit installed, skip to the next section.
1 Close the printer's top and front covers.
2 Remove the plastic side covers from the sides of the lower feeder unit.
» Note: If you have two lower feeder units
installed, remove the plastic side covers
from the top lower feeder unit only.
3 Locate the cable at the left rear of the
lower feeder unit that connects it to the
printer, and then unplug it.
4 Loosen the thumbscrew that attaches
the bracket to the lower feeder unit until
the bracket moves freely away from the
lower feeder unit.
Repacking the Printer
Repacking the Printer
103mati.eps
Thumbscrew
7-11