Repack The Printer - Xerox 6100 User Manual

Repack the Printer

If you need replacement packaging, in the United States, call MINOLTA-QMS Spares
at (251) 633-4300 extension 2530 and request catalog number 2600439-500. In loca-
tions outside the United States, refer to the Service & Support Guide or www.minolta-
qms.com.
Before packing the printer and strapping it to a pallet, verify that the actions described
in the following list have been completed.
Checklist
Item
RMA number/label
Repacking kit, pallet, strap-
ping and buckling supplies
Top and front covers
OPC belt cartridge
Cables
Media tray(s)
Toner cartridges
Fuser oil bottle
Cleaning roller
Fuser tension release levers
Waste toner bottle
Duplex unit
Lower feeder unit(s)
Top and front covers
Printer
Repacking the Printer
Should be... Additional actions
Received Before shipping, place the RMA label
clearly on the outside of the box.
Acquired, if
necessary
Opened If you have a duplex unit installed,
open its top cover before opening the
printer's top cover.
Installed
Removed
Removed
Removed
Removed Fuser oil remover syringe used to
remove the oil, and paper towels
inserted to absorb any residual oil
Removed
In forward
position
Replaced New waste toner bottle installed
Removed
Removed
Closed
Bagged
Repacking the Printer
7-13