Xerox 6100 User Manual page 171

Instructions
1 Thread one end of the strapping
through the wooden pallet.
2 Pull the two ends of the strapping
together in the approximate center of
the top of the printer.
3 Thread both ends up through the
center of the buckle.
4 Weave the slack of one end
through the buckle.
5 Pull the slack on that end so
that the strapping is taut in
the buckle.
6 Weave the slack of the other
end through the buckle.
Repacking the Printer
Repacking the Printer
7-15