Xerox 6100 User Manual page 22

Configuration Menu
Subnet Mask
The Subnet Mask menu allows you to set the printer's subnet mask. The address is in
the format xxx . xxx . xxx . xxx .
Menu
Choices
Default
Notes
Connection Timeout
This setting determines the amount of time that the network connection can remain
inactive before it is closed.
Menu
Choices
Default
Notes
1-12
Network/Subnet mask
Each xxx . xxx . xxx . xxx triplet can have a value of 001–254.
000.000.000.000
If subnets are not used with your network, the subnet mask should remain
000.000.000.000. (Check with your network administrator.) This allows the
interface to provide automatic sensing of gateways. If you identify a subnet
mask, this automatic sensing is disabled.
Once you save your changes to this menu, the printer automatically
reboots.
The address must consist only of numbers and periods. Selecting a letter
or another symbol results in an error message.
All xxx values must be three digits (for example, 1 is entered as 001, and
10 is entered as 010).
Network/Conn. Timeout
0–999 (seconds)
0
A new network connection is established every time a print job is sent to
the printer.
magicolor 6100 DeskLaser User's Guide