Xerox 6100 User Manual page 91

Caution: If you have a duplex unit installed, make sure you have opened the
duplex unit top cover before completing the following step. Forced opening of the
printer top cover first may damage the unit.
2 Pull the latch to release the top cover, and then open the cover.
» Note: The above illustration shows the printer without the duplex unit. The
cleaning instructions for models with and without the duplex unit are the same.
3 Using a dry cotton cloth, clean the paper exit rollers.
While manually rotating each paper exit roller, clean each roller.
4 Close the printer's top cover.
5 If you have a duplex unit installed, close the duplex unit rear cover.
6 Plug in the printer, and turn it on.
» Note: In compliance with UL guidelines, "The appliance inlet is considered to be
the main disconnect device."
Everyday Operations and Printer Care
Cleaning the Printer
P aper exit rollers
3-37