Xerox 6100 User Manual page 176

Requirements
einen geerdeten AC Ausgang mit geregeltem Gleichstrom mit 120 V oder 220-240 V.
Der Erdungsansluß des Stromkables sollte gut geerdet werden, um Stromschläge
und Feuer zu vermeiden.
» Note: In compliance with UL guidelines, "The appliance inlet is considered to be the
main disconnect device."
Fused
Printer
Rated Line Voltage
Amperage Capacity of
the Electrical Outlet
Maximum Electrical
Current
Noise-generating
Equipment
Recommended Frequency 50–60 Hz ±2 Hz for a 100 V system, 60 Hz ±2 Hz for
Your printer requires a properly grounded AC outlet with a rated line voltage of
100 V, 120 V, or 220-240 V.
The line voltage must remain within ±10 percent of the rated voltage for proper
operation of the printer.
Noise-generating equipment should not be connected to the same electrical outlet
as the printer.
A-4
For at least 15 amperes (8 amperes for 240 V).
Draws 11 A at 120 V, or 6 A at 240 V, or 13 A at
100 V.
Voltage of 100V, 120 V, or 220–240 V must remain
within ±10 percent of the rated line voltage for proper
operation.
Amperage capacity at least 1.2 times that used by
the printer.
Required during operation is 11 amps for a 120 V
system, 6 amps for a 220–240 V system and 13
amps for a 100 V system.
Should not be connected to the same electrical
outlet as the printer.
a 120 V system, and 50 Hz ±2 Hz for a 220-240 V
system.
magicolor 6100 DeskLaser User's Guide