Feeder Unit (PL3.2.1)
Phaser 6180 Color Laser Printer Service Manual
1.
Remove Tray 2.
2.
Remove the Rear Cover (page 8-11).
3.
Remove the Right Side Cover (page 8-12).
4.
Remove the Drive Assembly (page 8-76).
5.
Remove the Registration Clutch (page 8-41).
6.
Remove the Feed Clutch (page 8-42).
7.
Remove the Tray 1 (MPT) Roll (page 8-37).
Note
It is not necessary to remove the Tray 1 (MPT) No Paper Sensor
(PL3.1.15) and the Cover Sensor (PL3.1.16).
8.
Remove 2 screws (10 mm) securing the MPT Chute (PL3.1.14) to the
printer.
9.
Remove the MPT Chute from the printer.
Service Parts Disassembly
s6180-027
43