Customer Replaceable Units; Toner Cartridge - Xerox WorkCentre Pro 412 User Manual

Xerox workcentre pro 412: user guide
Hide thumbs Also See for WorkCentre Pro 412:
Table of Contents

Advertisement

Customer Replaceable Units

Toner Cartridge

Xerox WorkCentre Pro 412 User Guide
Expected Cartridge Life
The life of your toner cartridge depends on the amount of toner
used in each printed job. For instance, when you print a typical
business letter with about 5% page coverage, you can expect
a toner cartridge life of approximately 6,000 pages (3,000
pages only for the toner cartridge shipped with your machine).
The actual number may vary according to the print density of
the page you print. If you print a lot of graphics, you may need
to change the cartridge more often.
Toner Save Mode
You can extend the life of your toner cartridge by using Toner
Save mode. The Toner Save mode uses less toner than
normal printing. The printed image is much lighter, and is
adequate for printing drafts or proofs.
Use the instructions below to activate Toner Save mode.
½
Press [Menu/Exit] on the control panel to display 'SYSTEM
DATA'.
½
Press
or
until 'SYSTEM SETUP' appears in the
display, then press [Select].
½
Using
or
, select 'TONER SAVE'.
½
Use
or
to select 'ON'.
½
Press [Select] to save the setting.
Page 7-5

Advertisement

Table of Contents
loading

Table of Contents