Output Paper - Fuji Xerox Versant 3100 Press Printer Unit Manual

2.2 Output Paper

Offsetting
When offsetting is enabled, each set of printed paper is staggered
in the output tray so that you can separate the stack easily.
Enable offsetting on Print Server.
Offsetting is disabled when:
Sheets 297.1 mm portrait or larger and 181.9 mm portrait or smaller.

Offset is performed only when the paper length (portrait) is in a range between 182 and 297 mm.
Sheets 488.1 mm landscape or larger

Note The Offset Catch Tray offers a capacity of 500 sheets (A4 , Colotech+90, 1-sided job). Please note, however,
the capacity may be reduced depending on the following conditions.
Size of paper, Weight of paper

Types of paper (such as coated/uncoated) and the degree to which the paper is curled

2-sided printing

Toner density

When the Offset Catch Tray becomes full, the machine detects it and stops running.
Refer For detailed information on capacities of High Capacity Stacker Output tray and Finisher Output tray, refer to
the relevant chapters describing these units in the Optional Units Manual.
Purge Function
The sheets are ejected to the Offset Catch Tray or Output tray on optional units when they are in mid-flow
being fed, before paper jam causes the machine to stop. Also, after the jammed papers are removed, the
remaining sheets in the machine are ejected to the Offset Catch Tray (or to the Output tray closer to the
printer unit if any optional units are installed).
Do not reuse the sheets ejected by the Purge function, as this may cause paper jams.
Important
24
Printer Unit Manual