Fuji Xerox Versant 3100 Press Printer Unit Manual page 38

Symptom
Dirt appears at equal intervals.
Feed Direction
White dots appear in black filled areas.
Printed toner smudges when rubbed
with your finger.
Toner is not fused.The paper is soiled
with toner.
The entire paper area is printed black.
Nothing is printed.
38
Printer Unit Manual
Cause
The paper path is dirty.
The Fusing Module may be
dirty.
The drum cartridge has
deteriorated or is damaged.
The paper is unsuitable.
The Fusing Module may be
dirty.
The drum cartridge has
deteriorated or is damaged.
The toner is old.
The paper is damp.
The paper setting is
unsuitable.
The drum cartridge has
deteriorated or is damaged.
High-voltage power supply
may have malfunctioned.
Multifeed (multiple sheets
transferred simultaneously)
occurs.
Power supply or high-
voltage power supply may
have malfunctioned.
Remedy
Print a few pages to remove the dirt.
Clean the Fusing Module on a regular basis.
Refer "3.3.1 Clean Fusing Unit" in the
User Interface Manual.
Contact your local Fuji Xerox representative
to replace the Drum Cartridge.
Load suitable paper.
Clean the Fusing Module on a regular basis.
Refer "3.3.1 Clean Fusing Unit" in the
User Interface Manual.
Contact your local Fuji Xerox representative
to replace the Drum Cartridge.
Clean the toner on a regular basis.
"4.1.8 Maintenance" in the User
Refer
Interface Manual.
Replace paper.
Load the paper type and paper weight
correctly.
Contact your local Fuji Xerox representative
to replace the Drum Cartridge.
Contact your local Fuji Xerox representative.
Fan the paper well and load it again.
Contact your local Fuji Xerox representative.