Fuji Xerox Versant 3100 Press Printer Unit Manual page 36

Symptom
Tray 5 - 9 are not
displayed on the
touch screen
Indicated paper level
is wrong (High
Capacity Trays)
Troubles Concerning the Paper
Symptom
Paper jams or wrinkles
on paper occurs
frequently (problems
in how the paper is
loaded)
Paper jams or wrinkles
on paper occurs
frequently (problems
with the paper itself)
36
Printer Unit Manual
Cause
Are the main unit and the High
Capacity Feeder C3-DS
connected?
Is the Tray inserted correctly?
Cause
Are the paper and Tray settings
correct?
Are the paper guides set correctly? Load the paper correctly, and align the paper guides
Is paper exceeding the maximum
fill line in the Tray?
Are the special media loaded with
correct orientation?
Are there any torn pieces of paper
or foreign objects left in the
printer?
Is unsupported paper loaded in
the Tray?
Is the paper finely cut out?
Is any folded or wrinkled paper
loaded in the Tray?
Is the paper damp?
Are edges or holes of the loaded
paper sheets neatly aligned?
Is the paper curled?
Is paper curl correction properly
configured?
Remedy
Make sure the devices are securely connected.
Pull out the Tray, make sure the plate is lowered, and
then push the Tray into the machine slowly and firmly.
It may take some time for the printer to indicate the
paper level. This is because the printer is raising the
bottom plate or setting up the Air Assist function, and
thus not a malfunction.
Remedy
Please check if the set stock setting (size, type, weight
etc.) and the paper match.
Stock Library Manager Manual
Refer
with the paper.
Load paper in the Tray so that it does not exceed the
maximum fill line.
Load the media in correct direction.
Refer "2.3 Loading Paper" (p.25)
Check for jammed or torn paper, or any other objects
in the parts where paper often jams.
Replace with supported paper.
Some types of paper may not be cut correctly. Load
the paper after fanning it.
Remove folded or wrinkled paper sheets, or replace
with new paper.
Replace with fresh paper that has just been unpacked.
Replace paper having irregular edges or holes.
Turn over or flatten the curled paper, or replace with
uncurled paper.
Do not use 12 mm or more curled paper.
Perform curl correction.