Fuji Xerox Versant 3100 Press Printer Unit Manual page 16

Item
Image printable area
Assured image area
Image Loss Area
*: For paper weighing 71 g/m
Note
The lead edge A is set to 4 mm as the factory default value. If you change this default setting, contact your
local Fuji Xerox representative.
For detailed information about the Register Paper Feeding Positions, refer to "4.1.8 Maintenance" in the User
Refer
Interface Manual.
16
Printer Unit Manual
Maximum fed from Printer Unit Trays (1 - 3)
fed from Bypass Tray (5)
fed from High Capacity Trays (6 - 9)
Maximum fed from Printer Unit Trays (1 - 3)
fed from Bypass Tray (5)
fed from High Capacity Trays (6 - 9)
Front edge Paper type
Uncoated
Coated*
Rear edge 2 mm
Top / bottom fed from Printer Unit Trays (1 - 3)
fed from Bypass Tray (5)
fed from High Capacity Trays (6 - 9)
2
or lighter, paper feed performance cannot be guaranteed.
Size
Paper weight
2
52 - 350 g/m
2
52 - 72 g/m
2
73 - 119 g/m
2
120 - 350 g/m
323.2 x 482 mm
326.2 x 654.4 mm
326.2 x 482 mm
317.2 x 482 mm
317.2 x 654.4 mm
317.2 x 482 mm
Value of lead edge A
2 mm
4 mm
3 mm
2 mm
3.5 mm
2 mm
2 mm