Power On/Off; Powering On - Fuji Xerox Versant 3100 Press Printer Unit Manual

1.2 Power On/Off

The printer warms up and becomes ready to print within about 5 minutes after powered on.
Switch the power off at the end of a day or if the machine is not used for a long time.
Note The warm-up time may vary with an initial temperature of the printer.

After being inactive for a while, the printer automatically enters the Power Saver mode to reduce power

consumption. For detailed information about the Power Saver mode, refer to "1.4 Power Saver Mode" in the
User Interface Manual.
1.2.1

Powering On

1.
Press the power switch on the printer unit.
User interface will be powered on.
Note
When the printer becomes ready to print (i.e. enters the Standby mode), the message changes to "Ready
to Print."
2.
Power on your Print Server to start the Print Server.
Refer
12
Printer Unit Manual
When powered on, the printer immediately gets started to proceed with image quality adjustment,
but it takes some time before the printer becomes ready to print.
For information on functions and operations of the Print Server, refer to customer documentation
supplied with Print Servers.