Powering Off - Fuji Xerox Versant 3100 Press Printer Unit Manual

3.
On Print Server, make sure the Stock Library Manager is activated.
1.2.2

Powering Off

1.
Make sure all the printing is finished and the <Data> lamp is not blinking.
2.
Shut down the Print Server.
Stock Library Manager will be closed as the Print Server is shut down.
Refer
For information on functions and operations of the Print Server, refer to customer documentation
supplied with Print Servers.
3.
Press the power switch on the printer unit.
On pressing the power switch, the printer will be turned off after the time displayed on the screen lapses.
When you switch the power off, the <Power Saver> button on the control panel may continue blink-
ing even after the touch screen goes dark. Do not switch the main power off until the light of the
Important
<Power Saver> button goes off. (You can turn on the printer again.)
Note
When powering the printer on after it has been switched off, wait 10 seconds or more after the

touch screen has gone dark.
You can also switch the power off by clicking [Power Off] on CentreWare Internet Services under

[Status] tab > [General].
Chapter 1 Before Using the Machine
13