Fuji Xerox Versant 3100 Press Printer Unit Manual page 67

Cleaning the Touch Screen
Wipe the touch screen with a firmly wrung soft cloth moistened with neutral detergent or alcohol.
When you moisten the cloth with neutral detergent or alcohol, do not allow the excess liquid to drip down

from the cloth. If the cloth is moistened with the excess liquid, wring the cloth gently.
Important
Cleaning the touch screen with an excessive force may cause the screen to be damaged. Wipe the screen

gently.
Cleaning the Toner / Fusing Unit
Refer
For detailed information on how to clean, refer to refer to "4.1.8 Maintenance" and "3.3.1 Clean Fusing Unit"
in the User Interface Manual.
Where to Clean
2
No. Work
Cleaning Chute
1
Cleaning High Capacity Trays
2
Cleaning the Paper Feeding
3
Unit in the High Capacity Tray
When you have finished cleaning, make sure the roller and the surface of paper path are free from foreign
objects.
Important
Note
This cleaning instruction also applies to the 2nd High Capacity Feeder C1-DS.
3
1
Perform when:
you print with the paper size larger than that printed in bulk just

before.
(Example: Print with A4 in large quantities and then to print with
JIS B4.)
you printed on small strength papers

you print under the high temperature and high humidity environ-

ment (Frequently cleaning is recommended.)
you ran papers that generate much paper dust (such as roughly cut

papers and much coated papers)
you printed in bulk with extremely low toner density of image

under low temperature and low humidity
Every week (When collected paper dust is found in the Tray Guide or
roller in the Feeder Cover)
Every week
Frequency
Chapter 4 Maintenance
Page
p.68
p.70
p.72
67