Fuji Xerox Versant 3100 Press Printer Unit Manual page 69

Cleaning Exit Chute
Clean gently. If you perform with too much force, the ribs or the metal fingers for releasing paper

might be broken.
Important
Do not give damage on the roll near by.

(1) Use a soft and dry cloth to wipe the surface of the
ribs (gray) from the bottom to top.
(2) Wipe the inner surface of the ribs (white) similarly.
(3) Wipe the plate on the side of the roll off with the
small folded cloth.
(4) Wipe the inner surface of the plate similarly.
Cleaning Inlet Chute
(1) Wipe the surface of the chute from this side to far
side or from far side to this side.
Do not wipe the surface toward the paper feed direc-
tion because it may cause of a failure in cleaning of
Important
the roll due to paper dust.
4.
Push the Transfer Module gently into the machine
until it stops ( 1
5.
Turn lever "2" in the locking direction (toward the
closed-lock mark) (
6.
Close the covers.
).
2 ).
Chapter 4 Maintenance
69