Table of Contents
Advertisement
1.
Pull out the Tray toward you until it stops.
2.
Remove any paper remaining in the Tray.
3.
If the Postcard Kit is supplied with the Tray, loosen
the screw (
1
) on the left side of the Tray to remove
the Kit (
2
).
4.
Insert the small protrusion of the Kit into the notch
to the right side of the bottom of the Tray (
the hole of the Kit with the front Tray hole and
tighten the screw to fasten the Kit (
5.
Load about 100 to 500 sheets of paper with the
printed side facing up, and align the paper edges in
the direction of the arrow (
Be sure to set them in short edge feed.
The right side short edge of the set postcard will be
Important
the lead edge.
6.
Hold the long-side paper guide by its grip and move
it to lightly contact the paper edges (
If the amount of the loaded paper is less than 100
sheets, the guides apply more pressure to the paper.
Important
It may cause the paper to be distorted, leading to
paper jams.
7.
Load remaining sheets with the printed side facing
up, and align the paper edges in the direction of the
arrow (
1
).
8.
Hold the short-side paper guide by its grip and move
it to lightly contact the paper edges (
Do not load paper above the maximum fill line. It
may cause paper jams or machine malfunctions.
Important
Position the guides correctly to match the paper
size. Incorrectly positioned guides may cause mis-
feeding and paper jams.
1
). Align
2
).
1
).
2
).
2
).
1
2
1
1
2
Chapter 2 Load and Output Paper
2
1
2
29
Hide quick links:
Advertisement
Table of Contents
