Loading Paper; Loading Paper In Trays - Fuji Xerox Versant 3100 Press Printer Unit Manual

2.3 Loading Paper

After loading the paper, be sure to set the information of the loaded paper in [Tray Stock Properties] win-
dow on Stock Library Manager.
Refer For detailed information on how to regard Tray settings, refer to "Tray Status Confirmation / Setting Area" in
the Stock Library Manager Manual.
When pulling out the Tray, do it gently. If pulled out with too much force, the Tray can hit and injure
your knees.
Do not place any paper or objects in the empty space of Trays. It may cause paper jams or printer malfunc-

tions.
Important
Do not load mixed types of paper in a Tray as this may cause paper jams.

While the printer is processing a job, do not pull out the Tray being used for the job.

To avoid paper jams, and to prevent the different type of paper being loaded, make sure you do not add

paper to the remaining stack of paper in the Tray. If you removed remaining paper from the Tray, load new
paper first, and then add the remaining paper over the new paper.
Paper may stick together in case of some types or the state of the paper. Fan the paper well before loading

it.
2.3.1

Loading Paper in Trays

The Trays 1, 2 and 3 are refilled in the same way.
Images are printed on the underside of the loaded paper.
Up to 550 sheets (Colotech+90) can be loaded to each Tray.
Feed Direction
CAUTION
Printed side
Chapter 2 Load and Output Paper
25