$GPLQLVWUDWLRQ
This section contains:
•
"Basic interface of common MAT ITG windows" on page 158.
•
"Changing the SNMP Community Names to maintain access
security in MAT ITG" on page 161.
•
"Remote Access" on page 163.
The ITG OA&M access is provided through:
0$7#$GPLQLVWUDWLRQ#7RROV
•
The majority of ITG commands are performed through MAT, and
specific tasks are described in "ITG MAT OA&M tasks" on
page 165. The MAT ITG application is accessed by clicking the
"ITG IP Telecommuter" icon in the "MAT Navigator" window in
the "Services" folder. For basic information, refer also to "Basic
interface of common MAT ITG windows" on page 158.
&RPPDQG#/LQH#,QWHUIDFH
•
The RS-232 MMI port on an IP Line card, which is connected
directly to a VT-100 type terminal or to a PC running a terminal
emulation program. Once connected, a command-line interface
referred to as the ITG shell is available. ITG shell commands are
described in "ITG shell command-line interface access via Telnet or
maintenance port" on page 194, and a ITG shell commands are
listed in the Maintenance section. Use the following parameters on
the TTY: 9600 baud, 8 bits, no parity bit, one stop bit.
ITG Line 1.0/IP Telecommuter Description, Installation and Operation
Page 157 of 262