Nortel Meridian 1 Description, Installation And Operation page 227
Internet telephony gateway (itg) line 1.0/ip telecommuter
Hide thumbs
Also See for Meridian 1:
- Manual (1121 pages) ,
- Planning and installation manual (612 pages) ,
- Planning, installation and operating instructions (556 pages)
Table of Contents
Advertisement
Table 14
ITG Shell Commands
Command
DSP Commands :
DSPReset
DSPselfTest
DSPNumShow
DSPPcmLpbkTestOn
DSPPcmLpbkTestOff
DSPSndLpbkTestOn
DSPSndLpbkTestOff
DSPRcvLpbkTestOn
DSPRcvLpbkTestOff
Gatekeeper Query Commands :
GKInfoShow
GKClientInfoShow
GKGWInfoShow
GKCallInfoShow
Resets the specified DSP
Runs selftest on the DSP.
Prints number of DSPs on IP Line card.
Starts pcm loopback test on the specified DSP.
Stops pcm loopback test on the specified DSP.
Starts Send loopback test on the specified DSP.
Stops Send loopback test on the specified DSP.
Starts Receive loopback test on the specified DSP.
Stops Receive loopback test on the specified DSP.
Prints gatekeeper general information, which includes
TimeToLive values for the client and gateway.
Prints all registered Clients with their DN and IP ad-
dresses.
Prints all registered Gateways with lists of DNs.
Prints call information for all calls active or in
progress.
ITG Line 1.0/IP Telecommuter Description, Installation and Operation
Maintenance
Page 227 of 262
Description
Advertisement
Table of Contents
