Configure The Gatekeeper Properties - Nortel Meridian 1 Description, Installation And Operation
Internet telephony gateway (itg) line 1.0/ip telecommuter
Hide thumbs
Also See for Meridian 1:
- Manual (1121 pages) ,
- Planning and installation manual (612 pages) ,
- Planning, installation and operating instructions (556 pages)
Table of Contents
Advertisement
Page 110 of 262
&RQILJXUH#WKH#*DWHNHHSHU#3URSHUWLHV
553-3001-119 Standard 2.00 April 2000
Installation and configuration
After the reboot, the Leader 0 card will be in a state of "backup leader". It
cannot yet be in a state of "active leader", because it is missing the node
properties (bootp.1 bootp table file). After MAT successfully transmits the
node properties to Leader 0 card, it can enter the state of the "active leader".
Double-click "ITG IP Telecommuter" from the Services folder in the
1
MAT Navigator window. The IP Telephony Gateway - IP Telecommuter
window appears.
Click Configuration | Gatekeeper | Properties.
2
In the "ITG Gatekeeper Properties" window, click the Configuration
3
tab.
Select the "Use internal Gatekeeper" option.
4
Configure the Registration renewal time for the "IP Clients" and "IP Line
5
cards."
Click OK .
6
Advertisement
Table of Contents
