Upgrading Ip Line Card Software (If Required) - Nortel Meridian 1 Description, Installation And Operation

Upgrading IP Line card software (if required)

1 Download the MAT ITG software from the World Wide Web (WWW)
to the MAT PC hard drive. Open a browser on the MAT PC and connect
to WWW address:
KWWSV=22ZZZ1QRUWHOQHWZRUNV1FRP2HQWSURGV2FWV2RSWLRQ44F2
Once connected to the site, enter the username and password. Select the
latest recommended software version and select the location on the MAT
PC hard drive where it is to be downloaded. Record the MAT PC hard
drive location for use later in the procedure.
Open MAT and launch the "IP Telephony Gateway" application, if not
2
already opened.
3 Verify the current software version of the IP Line cards to be upgraded.
To check the software version, double-click a card and click the
"Configuration" tab where "S/W version" displays the current software
version as read from the IP Line card.
Select the cards from the main card list view that are to be upgraded.
4
Upgrade all the cards in the node together, unless you are installing a
spare card that has older software.
Disable all IP Line cards to be upgraded. Use the Meridian 1 overlay 32
5
DISI command from MAT Maintenance Windows, the MAT System
Passthru terminal, or from a Meridian 1 system management terminal
directly connected to a TTY port on the Meridian 1.
In the MAT "IP Telephony Gateway" main window, select
6
5HIUHVK
ITG Line 1.0/IP Telecommuter Description, Installation and Operation
Installation and configuration
and verify that the card status is showing "Disabled."
Page 127 of 262
9LHZ#_#