$FWLYDWH#6103#WUDSV#IRU#,3#/LQH#FDUGV
Define and activate SNMP traps with the following procedure:
1
Double-click "ITG IP Telecommuter" from the Services folder in the
MAT Navigator window. The IP Telephony Gateway - IP Telecommuter
window appears.
Double-click an IP Line card to define the SNMP traps for that card.
2
The "ITG Card Properties" window appears. Click the
3
To add an SNMP Manager IP address, type the address in the entry field,
4
$GG
and click
. You should add SNMP Manager IP addresses for:
•
the local MAT PC
•
PPP IP address configured in the Netgear RM356 Modem Router, or
equivalent, on the E-LAN for the remote support MAT PC
•
the SNMP manager for remote alarm monitoring via SEB2 and IRIS
nGEN (if present).
•
Any remote MAT PCs on the customer's IP network
ITG Line 1.0/IP Telecommuter Description, Installation and Operation
Installation and configuration
Page 131 of 262
6103#WUDSV
tab.