Nortel Meridian 1 Description, Installation And Operation page 230

Page 230 of 262
Table 15
General-Purpose Commands
Synopsis:
Description:
Table 16
File Transfer Commands
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
553-3001-119 Standard 2.00 April 2000
Maintenance
emodelSim
Allows user to interactively determine QoS score.
swDownload hostname, username, password, directory path, filename
Updates the software on the IP Line card with the binary file received from an
FTP server corresponding to the hostname IP address. The IP Line card ftp client
performs a get which downloads the file to the ITG flash bank. A checksum is
calculated to verify correct delivery. Once the new software version is
successfully downloaded, the IP Line card must be rebooted with cardReset in
order to run the new software.
Hostname refers to the either IP address of the FTP host, or the IP Line card itself
or another IP Line card when a PC card in the A: drive of the IP Line card
contains the software binary file.
ITG> swDownload "47.82.32.246", "anonymous", "guest", "/software",
"vxWorks.mms"
configFileGet hostname, username, password, directory path, filename
Updates the config.ini file on the IP Line card with the config.ini file on the
specified host, account and path. The configFileGet task on the ITG host initiates
an FTP session with the given parameters and downloads the file to flash file
system. The config.ini file also contains the gatekeeper IP address, gateway
password, and gateway DN-port mapping table.
ITG> ConfigFileGet "ngals042", "anonymous", "guest", "/configDir",
"config.ini"
bootPFileGet hostname, username, password, directory path,
filename
Updates the bootptab file on the IP Line card with the bootptab file on the
specified host, account and path. The bootpFileGet task on the ITG host initiates
an FTP session with the given parameters and downloads the file to flash file
system.
ITG> bootpFileGet "47.82.xx.xxx","anonymous","guest","/bootpDir",
"bootptab"