Transmit Card Properties And Gatekeeper Properties - Nortel Meridian 1 Description, Installation And Operation
Internet telephony gateway (itg) line 1.0/ip telecommuter
Hide thumbs
Also See for Meridian 1:
- Manual (1121 pages) ,
- Planning and installation manual (612 pages) ,
- Planning, installation and operating instructions (556 pages)
Table of Contents
Advertisement
Page 122 of 262
Transmit card properties and Gatekeeper properties
553-3001-119 Standard 2.00 April 2000
Installation and configuration
Verify that the IP Line cards are disabled in the Meridian 1 before
transmitting card properties.
When you configure or change passwords in the IP Clients tab but do not
change other Card Properties, you must transmit the Gatekeeper Properties
file only.
When you make a change to Card Properties but not to the passwords in the
IP Clients tab, you must transmit the Card Properties file only.
When you configure or change passwords in the IP Clients tab and make other
changes to Card Properties, you must transmit both the Gatekeeper Properties
file and Card Properties files.
Use the MAT Maintenance Windows, the MAT System Passthru terminal, or
use a Meridian 1 system management terminal directly connected to a TTY
port on the Meridian 1. Use the overlay 32 DISI command to disable the IP
Line cards when idle. In the MAT "IP Telephony Gateway" main window,
9LHZ#_#5HIUHVK
select
"Unequipped."
and verify that the card status is showing "Disabled" or
Advertisement
Table of Contents
