Nortel Meridian 1 Description, Installation And Operation page 179

&RQILJXULQJ#,3#/LQH#FDUG#'63#SURSHUWLHV
Note: The properties of all DSPs on an IP Line card are modified by
configuring the properties for "DSP 0" on an IP Line card. The "Restore
defaults" button can be used to restore all default values including
restoring the coding algorithm to G.729AB.
The default DSP parameters for the codec are suitable for most
applications. If you are not an expert in voice over IP, do not modify
them. Refer to the Administration section for more details.
24 Click to select the
&RQILJXUDWLRQ
25 Click the
26 Select the "G.729AB" codec from the "DSP coding algorithm"
pull-down menu.
$SSO\
27 Click then
ITG Line 1.0/IP Telecommuter Description, Installation and Operation
&$87,21
'63#3
icon underneath the IP Line card.
tab.
2.
.
Administration Page 179 of 262