Meridian 1 System Level Maintenance Of The Ip Line Card - Nortel Meridian 1 Description, Installation And Operation

Page 222 of 262

Meridian 1 system level maintenance of the IP Line card

553-3001-119 Standard 2.00 April 2000
Maintenance
The IP Line card system level maintenance can be performed in overlay 32,
in the same manner as with the NT8D14 Universal Trunk card. Table 13 lists
the commands supported on the IP Line card.
Table 13
Overlay 32 - ITG maintenance commands
Command
DISC l s c
DISI l s c
DISU l s c u
ENLC l s c
ENLU l s c u
IDC l s c
STAT l s c
STAT l s c u
Equivalent information to that provided by the STAT command can be
accessed from the command line on the card, as described in "ITG shell
commands" on page 223.
Function
Disable the specified card,
where: l = loop, s = shelf, c = card
Disable the specified card when idle, where: l =
loop, s = shelf, c = card
Disable the specified unit,
where: l = loop, s = shelf, c = card, u = unit
Enable the specified card,
where: l = loop, s = shelf, c = card
Enable the specified unit,
where: l = loop, s = shelf, c = card, u = unit
Print the Card ID information for the specified
card,
where: l = loop, s = shelf, c = card
Print the Meridian 1 software status of the
specified card.
where: l = loop, s = shelf, c = card
Print the Meridian 1 software status of the
specified unit,
where: l = loop, s = shelf, c = card, u = unit