Exchanging Data With A Computer (Sd Card Reader) - Zoom F4 Operation Manual

Exchanging data with a computer (SD Card Reader)

By connecting with a computer, you can check and copy data on the cards.
Connecting with a computer
1.
Press m.
2.
Use e to select USB,
and press E.
3.
Use e to select SD Card
Reader, and press E.
4.
Use a USB cable to connect the F and the
computer.
NOTE
• The supported operating systems are as follows.
Windows: Windows 7 or later
Mac OS: Mac OS X (10.8 or later)
• The F cannot operate on USB bus power. Use AA batteries
or a DC power supply.
HINT
When the F is connected to a computer, the SD cards loaded
in slots 1 and 2 are recognized as separate SD cards.
Disconnecting
1.
Disconnect on the computer.
Windows:
Select F from "Safely Remove Hardware".
Mac OS:
Drag and drop the F icon into the Trash.
NOTE
Always conduct computer disconnection procedures before
disconnecting the USB cable.
2.
Disconnect the cable from the computer and the
F, and press m.
F
Multi Track Field Recorder
119